i seriese Dimmer Module

Dimmer Module Data Sheet in *.pdf [pages
7&8]
Dimmer Module
Indicators
| LOAD LED ON :
|
The dimmer is on at some level. This led dims up and down proportionally with
the dimmer control level. |
| LOAD LED OFF
: |
The control to this dimmer is off. The
dimmer is off. |
| STATUS LED OFF : |
There is no DC power getting from the control module (s) to
the dimmer module. The dimmer module will not operate. |
| STATUS LED
GREEN : |
Normal Operation |
| STATUS LED YELLOW
: |
This dimmer module is in Overtemp Warning. |
| STATUS LED RED : |
This dimmer module is in Overtemp Shutdown. |
| The Overtemp Warning or Overtemp Shutdown condition would only occur if: |
| A. The rack is not fully
populated -- with either dimmer modules and / or airflow modules. |
| B. The air filters in
the door are clogged with dirt / dust. |
| C. The rack fan
is not operating. |
| D. The dimmer rack is
operating beyond it's maximum ambient operating temperature specification. |
|
In the unlikely event that a rack encounters an
overtemp condition, is strongly recommended that users minimize rack use, and call
technical services at (503) 404-5500 8am-5pm PST if they are unable to isolate and
rectify the cause of this potentially equipment damaging
condition.